null

Free domestic shipping for all orders over $150!

Carbon Coating Kit

Retail:
Was:
Now: $84.99 - $199.99
(You save )
(108 reviews) Write a Review
Carbon Coating Kit for 1-2 tools
  • Carbon Coating Prep Kit, Standard
  • Carbon Coating Prep Kit, Whole Shop

Description

Everything you need to get back hours of your life - and put them into woodworking where you want them! Prevent rust and reduce friction on your cast iron and other metal tools with a graphene coating that fills pores in metal. Add a nanolayer of protection that completely seals the work surface, providing long-lasting protection against water, oil, and chemicals, reducing wear and eliminating rust. Replace traditional waxes and sprays, and minimize maintenance, with Carbon Coat!

This kit contains the full Carbon Coating system, along with all the applicators you need to do the job. You'll find our "Carbon Cleanse" decontaminator for carbon coating application, which will allow you to fully clean your piece before Carbon Coating. Then apply "Carbon Coat" graphene protection for metal to seal your tool with a graphene coating that fills pores and completely seals the surface. Finally, apply "Carbon Glide" friction reducer for metal to further reduce friction - and get back the hours of your life you used to spend waxing, with a slick surface that installs quickly and doesn't melt.

Make protecting your tools easier with the Carbon Coating Kit: all the solutions and applicators you need - including our revolutionary new Coating Applicator Block system - in one convenient package. Welcome to the future of nanoprotection!

Additional Questions?

Check the Frequently Asked Questions section at the bottom of the Carbon Coating Application Guide, and if you don't see your question there, contact us by calling 616-366-4232 or emailing cs@carbonmethod.com.

Carbon Coating Quick Kit For 1-2 Tools

  • 0.5 fl oz "Carbon Coat" graphene protection for metal
  • 2.0 fl oz "Carbon Cleanse" decontaminator for carbon coating application
  • 6.0 fl oz "Carbon Glide" friction reducer for metal
  • 1 Carbon Method Coating Applicator Block
  • 1 Capture Dowel
  • 10 Carbon Method Coating Cloths
  • 4 Carbon Coating microfiber buffing towels
  • 4 pairs of gloves
  • Instruction booklet

Carbon Coating Quick Kit For 2+ Tools

  • 1.0 fl oz "Carbon Coat" graphene protection for metal
  • 2.0 fl oz "Carbon Cleanse" decontaminator for carbon coating application
  • 6.0 fl oz "Carbon Glide" friction reducer for metal
  • 1 Carbon Method Coating Applicator Block
  • 1 Capture Dowel
  • 10 Carbon Method Coating Cloths
  • 4 Carbon Coating microfiber buffing towels
  • 4 pairs of gloves
  • Instruction booklet

Carbon Coating Quick Kit, Whole Shop

  • 2.0 fl oz "Carbon Coat" graphene protection for metal
  • 6.0 fl oz "Carbon Cleanse" decontaminator for carbon coating application
  • 6.0 fl oz "Carbon Glide" friction reducer for metal
  • 1 Carbon Method Coating Applicator Block
  • 1 Capture Dowel
  • 20 Carbon Method Coating Cloths
  • 8 Carbon Coating microfiber buffing towels
  • 8 pairs of gloves
  • Instruction booklet

108 Reviews

  • 4
    4 stars only because I have just applied carbon method to my tablesaw. It applied as stated and so far(6 days) absolutely no rust. I live in Thailand which is a humid place and now is rainy season. No rust amazing. I have not used the to inhance the

    Published by David Wallace Moulton on 23rd Sep 2022

    I believe this product will do what it says it will. Time will tell. Now I just need to get some more cleaner to do my jointer

  • 5
    Excellent product!

    Published by Nick Paccia on 20th Sep 2022

    This product is super easy to apply and the application instructions make it simple to follow. I’m very happy with the results after applying the Carbon Coat! I’ve recommended this product to anyone looking for excellent protection of their tools.

  • 5
    Finally a product that keeps all my cast iron tools from rusting.

    Published by Calvin Stark, Jr. on 15th Sep 2022

    This is the only product that I have found that keeps my saw and jointer tops like new and slick as a whistle. I live in NC and high humidity created a thin film of rust on all my cast iron. Constantly having to remove and wax only to come back and do it again a couple of weeks later. Applied Carbon Method and now no rust! Tables bead up water, and are super slick. Great Product.

  • 5
    Great product

    Published by Kevin Parker on 10th Sep 2022

    My new lathe was rusting up instantly when I turned wet wood. I put Carbon Method on and it hasn’t rusted at all since. I’m very pleased.

  • 5
    Carbon Coating Quick Kit

    Published by Forest Gager on 9th Sep 2022

    Received kit in about a week after order. Application instruction were great and watching video on youtube was great. Had a question and called talked to Dan. He was very helpful with my mistake. I am buying more for my other machines. I am recommending to all my fellow woodworkers and machinists.

  • 4
    carbon coat

    Published by Michael Haberman on 9th Sep 2022

    I went thru application to my Sawstop PCS and Powermatic 6 inch jointer. The cleanse bottle essentially ran out. There is a small amount left of the actual carbon coat protectant after 4 repetitions so not enough for more than 2 machines. There were only 3 applicators and instruction is unclear as to whether I can reuse the 2 sided applicator - I used one side for each application so 2 applicators were used up with the 4 repetitions. I have not yet used the carbon glide as instructions were unclear - it said do not use liquid for at least 24 hours after carbon coating. I plan to put glide on now and then it seems I have to wait 7 days for all to harden. You might want to clarify that step (adding glide after carbon coat) in the instructions.

  • 5
    Kit

    Published by Kenneth S CHURCH on 9th Sep 2022

    Everything went well, did my table saw & jointer/planer. I'll have to wait and see how long it lasts

  • 5
    Great product

    Published by Nick on 8th Sep 2022

    Impressed so far with the coating. I live in high humidity and waxes just don’t cut it

  • 5
    Carbon Method ceramic coating protection for cast iron

    Published by Philippe Larrivee on 8th Sep 2022

    Fantastic product and easy to follow instructions. My table saw cast iron top looks better than new…. Moving to the planner/jointer combo tonight! Hopefully, it will last as long as they claim.

  • 5
    Carbon method

    Published by Al Hurtado on 7th Sep 2022

    Excellent product

Related Products