null

Free domestic shipping for all orders over $150!

Carbon Coating Kit

Retail:
Was:
Now: $84.99 - $199.99
(You save )
(109 reviews) Write a Review
Carbon Coating Kit for 1-2 tools
  • Carbon Coating Prep Kit, Standard
  • Carbon Coating Prep Kit, Whole Shop

Description

Everything you need to get back hours of your life - and put them into woodworking where you want them! Prevent rust and reduce friction on your cast iron and other metal tools with a graphene coating that fills pores in metal. Add a nanolayer of protection that completely seals the work surface, providing long-lasting protection against water, oil, and chemicals, reducing wear and eliminating rust. Replace traditional waxes and sprays, and minimize maintenance, with Carbon Coat!

This kit contains the full Carbon Coating system, along with all the applicators you need to do the job. You'll find our "Carbon Cleanse" decontaminator for carbon coating application, which will allow you to fully clean your piece before Carbon Coating. Then apply "Carbon Coat" graphene protection for metal to seal your tool with a graphene coating that fills pores and completely seals the surface. Finally, apply "Carbon Glide" friction reducer for metal to further reduce friction - and get back the hours of your life you used to spend waxing, with a slick surface that installs quickly and doesn't melt.

Make protecting your tools easier with the Carbon Coating Kit: all the solutions and applicators you need - including our revolutionary new Coating Applicator Block system - in one convenient package. Welcome to the future of nanoprotection!

Additional Questions?

Check the Frequently Asked Questions section at the bottom of the Carbon Coating Application Guide, and if you don't see your question there, contact us by calling 616-366-4232 or emailing cs@carbonmethod.com.

Carbon Coating Quick Kit For 1-2 Tools

  • 0.5 fl oz "Carbon Coat" graphene protection for metal
  • 2.0 fl oz "Carbon Cleanse" decontaminator for carbon coating application
  • 8.0 fl oz "Carbon Glide" friction reducer for metal
  • 1 Carbon Method Coating Applicator Block
  • 1 Capture Dowel
  • 10 Carbon Method Coating Cloths
  • 4 Carbon Coating microfiber buffing towels
  • 4 pairs of gloves
  • Instruction booklet

Carbon Coating Quick Kit For 2+ Tools

  • 1.0 fl oz "Carbon Coat" graphene protection for metal
  • 2.0 fl oz "Carbon Cleanse" decontaminator for carbon coating application
  • 8.0 fl oz "Carbon Glide" friction reducer for metal
  • 1 Carbon Method Coating Applicator Block
  • 1 Capture Dowel
  • 10 Carbon Method Coating Cloths
  • 4 Carbon Coating microfiber buffing towels
  • 4 pairs of gloves
  • Instruction booklet

Carbon Coating Quick Kit, Whole Shop

  • 2.0 fl oz "Carbon Coat" graphene protection for metal
  • 8.0 fl oz "Carbon Cleanse" decontaminator for carbon coating application
  • 8.0 fl oz "Carbon Glide" friction reducer for metal
  • 1 Carbon Method Coating Applicator Block
  • 1 Capture Dowel
  • 20 Carbon Method Coating Cloths
  • 8 Carbon Coating microfiber buffing towels
  • 8 pairs of gloves
  • Instruction booklet

109 Reviews

  • 5
    m

    Published by jim gore on 22nd Dec 2022

    n

  • 4
    Carbon coating quick kit.

    Published by Ron Benson on 5th Dec 2022

    It hasn't been on my table saw long, but it was easy to apply, and even though I can't comment on it's rust preventing effectiveness yet, the top of the saw is much slipperier now. I even put it on the bottom of my crosscut sled and saw improvement there also.

  • 5
    Time Saver

    Published by Hunter on 16th Nov 2022

    I hate, hate, hate waxing my table saw and jointer. I was very skeptical of how this would work but so far, so good! I love the idea that I can do this once or twice a year and it will hold, and the Carbon Glide will refresh the "slideability." I've only had it on for a couple of weeks, so will be itnerested to see how long it really lasts, but as of now it's great

  • 5
    Carbon Coating and Carbon Glide

    Published by tim Novak on 10th Nov 2022

    I have a jointer that had surface rust on the bed and on the fence. after cleaning and applying the Carbon coating method I have not had any rust visible. I highly recommend this product. I saw the product used on the wood whisper. I decided to try it.

  • 5
    best

    Published by fernando on 5th Nov 2022

    good good

  • 5
    This Stuff Works!

    Published by Bob Hughes on 2nd Nov 2022

    Our table saw sits in an open shed right in the thick of San Francisco Bay fog. I can already say that this stuff works after only two weeks. Prior to applying Carbon Method, I would have had to clean rust off of my saw every morning. Carbon Method has stood up to the abuse of San Francisco Bay fog on my table saw top.

  • 5
    Works EXACTLY as advertised!!!

    Published by Daron on 25th Oct 2022

    Like many I was skeptical. I wish this product was available years ago to save me the hassle of constantly scrubbing rust off and reapplying T-9 and paste wax every 1-2 months. I applied this to my new Sawstop and 3 months now and my cast iron top looks brand new still. I also applied it to my Jointer, and bandsaw. I will use this stuff for life, it is worth EVERY penny. For those who review it negatively I question their adherence to the manufacturers directions. Apply it EXACTLY as they instruct you to and it works EXACTLY as they advertise. Thank you Carbon Method, from the bottom of my heart. And the customer service was the best ever.

  • 5
    Carbon Method - Carbon Coating Quick Kit

    Published by Don Patterson on 3rd Oct 2022

    Hardest part was cleaning the saw surface. The rest is really easy to apply products from Carbon Method. The mystery will be to see how long it lasts. I don't use my table saw a lot so I expect it to last quite awhile. Will apply to my jointer next and then band saw tables which see much more action. Exactly as advertised. Time will tell if it is worth the investment.

  • 5
    Carbon coating

    Published by Robert Fisher on 3rd Oct 2022

    I put it on my table saw, joiner and band saw. Could not be easier to apply.

  • 4
    Product so far has protected my new industrial Saw Stop cast Iron top. It has only been on for two weeks. It does make the top slick and easier to push wood across to saw top, I hope it lasts for several months. Kit has everything included.

    Published by Tyler Tyler Lakin on 25th Sep 2022

    I have recommended the product to my friends that are wood workers.

Related Products