null

Get a FREE Prep Kit with any Carbon Coating Kit! Now thru Sep 3.

Carbon Coating Kit

Retail:
Was:
Now: $84.99 - $199.99
(You save )
(113 reviews) Write a Review
Carbon Coating Kit for 1-2 tools

Now thru Sep 3, get a FREE Prep Kit (Standard) with the purchase of any Carbon Coating Kit.

 

Just select your "Add Prep Kit?" option below!

  • Carbon Coating Prep Kit, Standard
  • Carbon Coating Prep Kit, Whole Shop

Description

Everything you need to get back hours of your life - and put them into woodworking where you want them! Prevent rust and reduce friction on your cast iron and other metal tools with a graphene coating that fills pores in metal. Add a nanolayer of protection that completely seals the work surface, providing long-lasting protection against water, oil, and chemicals, reducing wear and eliminating rust. Replace traditional waxes and sprays, and minimize maintenance, with Carbon Coat!

This kit contains the full Carbon Coating system, along with all the applicators you need to do the job. You'll find our "Carbon Cleanse" decontaminator for carbon coating application, which will allow you to fully clean your piece before Carbon Coating. Then apply "Carbon Coat" graphene protection for metal to seal your tool with a graphene coating that fills pores and completely seals the surface. Finally, apply "Carbon Glide" friction reducer for metal to further reduce friction - and get back the hours of your life you used to spend waxing, with a slick surface that installs quickly and doesn't melt.

Make protecting your tools easier with the Carbon Coating Kit: all the solutions and applicators you need - including our revolutionary new Coating Applicator Block system - in one convenient package. Welcome to the future of nanoprotection!

Additional Questions?

Check the Frequently Asked Questions section at the bottom of the Carbon Coating Application Guide, and if you don't see your question there, contact us by calling 616-366-4232 or emailing cs@carbonmethod.com.

Carbon Coating Quick Kit For 1-2 Tools

  • 0.5 fl oz "Carbon Coat" graphene protection for metal
  • 2.0 fl oz "Carbon Cleanse" decontaminator for carbon coating application
  • 8.0 fl oz "Carbon Glide" friction reducer for metal
  • 1 Carbon Method Coating Applicator Block
  • 1 Capture Dowel
  • 10 Carbon Method Coating Cloths
  • 4 Carbon Coating microfiber buffing towels
  • 4 pairs of gloves
  • Instruction booklet

Carbon Coating Quick Kit For 2+ Tools

  • 1.0 fl oz "Carbon Coat" graphene protection for metal
  • 2.0 fl oz "Carbon Cleanse" decontaminator for carbon coating application
  • 8.0 fl oz "Carbon Glide" friction reducer for metal
  • 1 Carbon Method Coating Applicator Block
  • 1 Capture Dowel
  • 10 Carbon Method Coating Cloths
  • 4 Carbon Coating microfiber buffing towels
  • 4 pairs of gloves
  • Instruction booklet

Carbon Coating Quick Kit, Whole Shop

  • 2.0 fl oz "Carbon Coat" graphene protection for metal
  • 8.0 fl oz "Carbon Cleanse" decontaminator for carbon coating application
  • 8.0 fl oz "Carbon Glide" friction reducer for metal
  • 1 Carbon Method Coating Applicator Block
  • 1 Capture Dowel
  • 20 Carbon Method Coating Cloths
  • 8 Carbon Coating microfiber buffing towels
  • 8 pairs of gloves
  • Instruction booklet

113 Reviews

  • 5
    Carbon Coating prep and quick kit

    Published by Ted Thompson on 15th Mar 2024

    This product was so awesome!. I live in very humid Texas and am constantly fighting woodworking equipment rust. The process was very clear and I am totally pleased with the results. I don't plan to ever use anything else in my shop and am already telling my fellow woodworkers about the products.

  • 5
    Application was easy, only time will tell…

    Published by Brad on 11th Mar 2024

    Watched the video and read the instructions. Everything went well and I had enough Carbon Coat to put four coats on 3 large cast iron surfaces. Will allow to fully cure before using Carbon Glide. Lots of Carbon Cleanse left for further applications. Surfaces now look as good as new and I’m looking forward to only needing periodic maintenance to keep them looking great. Thanks CM!

  • 5
    Carbon Method

    Published by Bob Barth on 7th Mar 2024

    Excellent product. My table saw looks like new, and the glide brings it to a new level of slickness. I am preparing to use it on my jointer next.

  • 3
    carbon method

    Published by Thomas on 4th Mar 2024

    So far seems to be working but only time will tell. Very frustrated because I was only able to coat my saw 2-1/2 times when it calls for 3 or 4 coats. Win some , lose some.

  • 5
    Quality product

    Published by Jason Jones on 19th Feb 2024

    So far I really like this system for my sawstop. The instructions are very easy and everything is sent in the kit you will need. The table is clean and slick. It feels very protected. I would suggest this product to anyone looking for a good solution to protect their investment.

  • 5
    Great product.

    Published by Robert Dickey on 16th Feb 2024

    I would highly recommend this product.

  • 4
    Carbon coating quick kit

    Published by James Curtis on 12th Feb 2024

    Product was well packaged, directions easy to follow. Applied 3-4 coats to my new 8" Jointer, my bandsaw table and my spindle sander. Still have others pending. Based on usage per instructions, the Carbon Cleanse will be the first to run out. The plastic gloves included in the kit are rather fragile and easily damaged. Looking forward to a LONG period between cast iron treatment to prevent rust.

  • 5
    Carbon coating kit

    Published by chris Pelletier on 8th Feb 2024

    The Carbon kit came very quickly, and was packaged well. The kit came with everything I needed to get started! Applied the carbon coat with ease. The video instructions are perfect and easy to follow!

  • 5
    very slick

    Published by Jeffrey R Mohr on 18th Jan 2024

    it is a good product. My table saw is amazingly slick. I did my table saw, jointer and planer. all are easier to use. longevity yet to be determined. I like it!

  • 5
    Carbon coat for table saw

    Published by LCT on 21st Dec 2023

    Went on easily. The directions and video were very helpful. It’s only been on for two weeks but so far it looks good, feels like satin if you run your fingers across it and stuff slides really smoothly across it. I’d definitely buy it again

Related Products