null

Free domestic shipping for all orders over $150!

Carbon Coating Kit

Retail:
Was:
Now: $84.99 - $199.99
(You save )
(108 reviews) Write a Review
Carbon Coating Kit for 1-2 tools
  • Carbon Coating Prep Kit, Standard
  • Carbon Coating Prep Kit, Whole Shop

Description

Everything you need to get back hours of your life - and put them into woodworking where you want them! Prevent rust and reduce friction on your cast iron and other metal tools with a graphene coating that fills pores in metal. Add a nanolayer of protection that completely seals the work surface, providing long-lasting protection against water, oil, and chemicals, reducing wear and eliminating rust. Replace traditional waxes and sprays, and minimize maintenance, with Carbon Coat!

This kit contains the full Carbon Coating system, along with all the applicators you need to do the job. You'll find our "Carbon Cleanse" decontaminator for carbon coating application, which will allow you to fully clean your piece before Carbon Coating. Then apply "Carbon Coat" graphene protection for metal to seal your tool with a graphene coating that fills pores and completely seals the surface. Finally, apply "Carbon Glide" friction reducer for metal to further reduce friction - and get back the hours of your life you used to spend waxing, with a slick surface that installs quickly and doesn't melt.

Make protecting your tools easier with the Carbon Coating Kit: all the solutions and applicators you need - including our revolutionary new Coating Applicator Block system - in one convenient package. Welcome to the future of nanoprotection!

Additional Questions?

Check the Frequently Asked Questions section at the bottom of the Carbon Coating Application Guide, and if you don't see your question there, contact us by calling 616-366-4232 or emailing cs@carbonmethod.com.

Carbon Coating Quick Kit For 1-2 Tools

  • 0.5 fl oz "Carbon Coat" graphene protection for metal
  • 2.0 fl oz "Carbon Cleanse" decontaminator for carbon coating application
  • 6.0 fl oz "Carbon Glide" friction reducer for metal
  • 1 Carbon Method Coating Applicator Block
  • 1 Capture Dowel
  • 10 Carbon Method Coating Cloths
  • 4 Carbon Coating microfiber buffing towels
  • 4 pairs of gloves
  • Instruction booklet

Carbon Coating Quick Kit For 2+ Tools

  • 1.0 fl oz "Carbon Coat" graphene protection for metal
  • 2.0 fl oz "Carbon Cleanse" decontaminator for carbon coating application
  • 6.0 fl oz "Carbon Glide" friction reducer for metal
  • 1 Carbon Method Coating Applicator Block
  • 1 Capture Dowel
  • 10 Carbon Method Coating Cloths
  • 4 Carbon Coating microfiber buffing towels
  • 4 pairs of gloves
  • Instruction booklet

Carbon Coating Quick Kit, Whole Shop

  • 2.0 fl oz "Carbon Coat" graphene protection for metal
  • 6.0 fl oz "Carbon Cleanse" decontaminator for carbon coating application
  • 6.0 fl oz "Carbon Glide" friction reducer for metal
  • 1 Carbon Method Coating Applicator Block
  • 1 Capture Dowel
  • 20 Carbon Method Coating Cloths
  • 8 Carbon Coating microfiber buffing towels
  • 8 pairs of gloves
  • Instruction booklet

108 Reviews

  • 5
    Great product.

    Published by Robert Dickey on 16th Feb 2024

    I would highly recommend this product.

  • 4
    Carbon coating quick kit

    Published by James Curtis on 12th Feb 2024

    Product was well packaged, directions easy to follow. Applied 3-4 coats to my new 8" Jointer, my bandsaw table and my spindle sander. Still have others pending. Based on usage per instructions, the Carbon Cleanse will be the first to run out. The plastic gloves included in the kit are rather fragile and easily damaged. Looking forward to a LONG period between cast iron treatment to prevent rust.

  • 5
    Carbon coating kit

    Published by chris Pelletier on 8th Feb 2024

    The Carbon kit came very quickly, and was packaged well. The kit came with everything I needed to get started! Applied the carbon coat with ease. The video instructions are perfect and easy to follow!

  • 5
    very slick

    Published by Jeffrey R Mohr on 18th Jan 2024

    it is a good product. My table saw is amazingly slick. I did my table saw, jointer and planer. all are easier to use. longevity yet to be determined. I like it!

  • 5
    Carbon coat for table saw

    Published by LCT on 21st Dec 2023

    Went on easily. The directions and video were very helpful. It’s only been on for two weeks but so far it looks good, feels like satin if you run your fingers across it and stuff slides really smoothly across it. I’d definitely buy it again

  • 5
    Carbon Method kit

    Published by Jay Houghton on 3rd Dec 2023

    I wasn't really skeptical about this product after seeing so many reviews by the on-line guru's of woodworking. But I finally got fed up with constantly cleaning and waxing all the table saws and jointers at my local woodworking club (I'm the maintenance guy). I will say your best value is the kit of 3+ machines, which will give you more than that depending on the size of the top. But it goes on easy so far I'm impressed. One piece of advice, take your time cleaning the top. Cast iron is porous so you may not get all the stains out but take the extra time to really get it looking good and you'll be rewarded by it. Finally, I think all the reviews are well deserved. It's not cheap, but given the durability and performance I think it's a good value.

  • 5
    This actually works.

    Published by James on 29th Nov 2023

    I live in western ny, my shop is in a barn with no climate control so it can be 100 degree or below zero depending on the time of year. I always have a problem with rust...I would have to use bowshield every 2-3 weeks to avoid rust. I was skeptical that the carbon method would work. Well I have been using it for over a year and I went 6 months without any rust during the worst time of the year. I reapplied after 6 months just to make sure but I haven't had any rust. Very happy with the product and would highly recommend it.

  • 4
    Good, but...

    Published by Unknown on 28th Nov 2023

    Only complaint is there isn't enough carbon cleanse in the two unit package. I only had enough for my table saw. Otherwise it seems to be a great product.

  • 5
    Carbon Coating Quick Kit

    Published by ERNEST SWOFFORD on 23rd Nov 2023

    This is a great product. It does exactly as it is advertised to do. I applied it to my Harvey Tin coated table saw. and it is great!!!

  • 5
    Great product & customer service

    Published by Scott on 23rd Oct 2023

    I am not able to say enough about the product or their customer service. The product is great if you want to protect your woodworking tools. Applied it 6 months ago and still looks great and is smooth. Customer service, well they are very responsive. Dan got back to me within 24 hours of reaching out. You cannot ask for more.

Related Products