null

Free domestic shipping for all orders over $150!

Carbon Coating Kit

Retail:
Was:
Now: $84.99 - $199.99
(You save )
(108 reviews) Write a Review
Carbon Coating Kit for 1-2 tools
  • Carbon Coating Prep Kit, Standard
  • Carbon Coating Prep Kit, Whole Shop

Description

Everything you need to get back hours of your life - and put them into woodworking where you want them! Prevent rust and reduce friction on your cast iron and other metal tools with a graphene coating that fills pores in metal. Add a nanolayer of protection that completely seals the work surface, providing long-lasting protection against water, oil, and chemicals, reducing wear and eliminating rust. Replace traditional waxes and sprays, and minimize maintenance, with Carbon Coat!

This kit contains the full Carbon Coating system, along with all the applicators you need to do the job. You'll find our "Carbon Cleanse" decontaminator for carbon coating application, which will allow you to fully clean your piece before Carbon Coating. Then apply "Carbon Coat" graphene protection for metal to seal your tool with a graphene coating that fills pores and completely seals the surface. Finally, apply "Carbon Glide" friction reducer for metal to further reduce friction - and get back the hours of your life you used to spend waxing, with a slick surface that installs quickly and doesn't melt.

Make protecting your tools easier with the Carbon Coating Kit: all the solutions and applicators you need - including our revolutionary new Coating Applicator Block system - in one convenient package. Welcome to the future of nanoprotection!

Additional Questions?

Check the Frequently Asked Questions section at the bottom of the Carbon Coating Application Guide, and if you don't see your question there, contact us by calling 616-366-4232 or emailing cs@carbonmethod.com.

Carbon Coating Quick Kit For 1-2 Tools

  • 0.5 fl oz "Carbon Coat" graphene protection for metal
  • 2.0 fl oz "Carbon Cleanse" decontaminator for carbon coating application
  • 6.0 fl oz "Carbon Glide" friction reducer for metal
  • 1 Carbon Method Coating Applicator Block
  • 1 Capture Dowel
  • 10 Carbon Method Coating Cloths
  • 4 Carbon Coating microfiber buffing towels
  • 4 pairs of gloves
  • Instruction booklet

Carbon Coating Quick Kit For 2+ Tools

  • 1.0 fl oz "Carbon Coat" graphene protection for metal
  • 2.0 fl oz "Carbon Cleanse" decontaminator for carbon coating application
  • 6.0 fl oz "Carbon Glide" friction reducer for metal
  • 1 Carbon Method Coating Applicator Block
  • 1 Capture Dowel
  • 10 Carbon Method Coating Cloths
  • 4 Carbon Coating microfiber buffing towels
  • 4 pairs of gloves
  • Instruction booklet

Carbon Coating Quick Kit, Whole Shop

  • 2.0 fl oz "Carbon Coat" graphene protection for metal
  • 6.0 fl oz "Carbon Cleanse" decontaminator for carbon coating application
  • 6.0 fl oz "Carbon Glide" friction reducer for metal
  • 1 Carbon Method Coating Applicator Block
  • 1 Capture Dowel
  • 20 Carbon Method Coating Cloths
  • 8 Carbon Coating microfiber buffing towels
  • 8 pairs of gloves
  • Instruction booklet

108 Reviews

  • 5
    Carbon Method

    Published by KENNETH LAVERTU on 26th Feb 2025

    Went on very easy. Instructions were well written and easy to follow. Get more than you think you will need.

  • 5
    Carbon Method

    Published by Mark on 25th Feb 2025

    Excellent product for my cast iron shop equipment. Outlasts other treatment products!

  • 5
    Carbon coating kit

    Published by Bryant on 16th Feb 2025

    I never do reviews, but this stuff is amazing! I live in South East Texas where the humidity is in the 80's and 90's all the time. It gets so hot that you are dripping with sweat while you work. I finally purchased my dream tablesaw and needed to protect it. Wax would last a week and I would need to re apply it. This Carbon Coat has lasted for months without having to reapply it. It is truly amazing and worth every penny. Buy it, follow the instructions, YOU WILL LOVE IT!

  • 5
    Carbon Method Kit

    Published by Denton White on 31st Jan 2025

    This product is what all others aren't. It protects my investment in a Harvey 110-S Table Saw better than every other rust prevention/protection method I've used. The Carbon Glide product is superior to other methods I've used to ensure the stock doesn't get hung up in the process of cutting. This is it. I've found what I like in Carbon Method.

  • 5
    Easy to apply, has great protection.

    Published by Dennis Mosher on 22nd Jan 2025

    I applied it to my table saw, band saw and my oscillating drum sander. It's a great product and highly recommend it.

  • 5
    Whole shop kit

    Published by Howard McCall on 6th Jan 2025

    All the products work as advertised. The instructions to use the rust of the protection is not clear on the use of the cloth that goes on the foam block. Overall I’m very pleased

  • 5
    Carbon Method

    Published by Frank G on 22nd Nov 2024

    Product is as described

  • 5
    Easy to apply; good coverage.

    Published by Bill on 20th Nov 2024

    I was able to coat my table saw, 8" jointer, bandsaw, drill press and mini lathe with the 2-4 machine kit, with a little left over. The application was pretty easy.

  • 5
    Carbon Method

    Published by James on 17th Nov 2024

    Outstanding product. Goes on easy and buffs out easy. Used it on My Table saw, Router table(cast iron nickel coat) Drill press, and Band saw. Everything is super slick!!!

  • 5
    Carbon Coating Kit

    Published by P. Martin Fenlon on 24th Oct 2024

    Great product, complete kit that was easy to use and provided great coverage for my SawStop table saw. Will use it on my other cast iron tools.

Related Products