Description

The ideal tool for conditioning cast iron for Carbon Coat application! These extra-thick 6" x 9" pads flex to work into pitted rust spots, and are faster and cleaner than sandpaper or steel wool. Abrasives are infused throughout the pad for long life, and they're designed to resist loading when used with Carbon Method Reconditioning Oil.

Additional Questions?

Check the Frequently Asked Questions page, and if you don't see your question there, contact us by calling 844-432-2266 or emailing cs@carbonmethod.com.

UPC:

6 Reviews

4
Abrasion and polishing

Published by George Cooksey on 5th Aug 2024

There are 3 sheets in each grit. I recommend cutting them in half, as that fit my 5” sander best. So, there’s enough for several tools or applications. They work well, as expected.
5
abrasive pads

Published by Richard Barrow on 12th Feb 2024

I used these pads and reconditioning oil to clean up two band saws, two table saws, one jointer/ planer and a shaper. There wasn't much rust to contend with but there were some light stains. I tried using my random orbit sander but there was too much spray of the oil from the sander so I used a Rubio Monocoat pad handle and scrubbed the cast iron by hand. I am very happy with the finish.
5
Abrasive pads

Published by chris Pelletier on 8th Feb 2024

No issues here!
5
Abrasive pads

Published by Mike Embury on 20th Jul 2023

Work well. If you have any questions on any of the product and you call they DO return your call and respond to your email. Good company.
3
Abrasive Pads

Published by Phil Goodwill on 27th Jun 2023

I used a power buffer ( 5") to clean my surfaces. These pads only yielded one 5" pad, a lot of wasted material. I found 5" pads on the WEB and they worked much better. Carbon Method should offer an option to purchase and already cut 5" pad.
3
Abrasive pads

Published by Ron Cunning on 6th Apr 2023

Not thrilled. I found them to thin and wore through very quickly.