null

Free domestic shipping for all orders over $150!

Carbon Coating Quick Kit

Retail:
Was:
Now: $84.99 - $199.99
(You save )
(86 reviews) Write a Review
Carbon Coating Quick Kit for 1-2 tools

Description

Everything you need to get back hours of your life - and put them into woodworking where you want them! Prevent rust and reduce friction on your cast iron and other metal tools with a graphene coating that fills pores in metal. Add a nanolayer of protection that completely seals the work surface, providing long-lasting protection against water, oil, and chemicals, reducing wear and eliminating rust. Replace traditional waxes and sprays, and minimize maintenance, with Carbon Coat!

This quick kit contains the full Carbon Coating system, along with all the applicators you need to do the job. You'll find our "Carbon Cleanse" decontaminator for carbon coating application, which will allow you to fully clean your piece before Carbon Coating. Then apply "Carbon Coat" graphene protection for metal to seal your tool with a graphene coating that fills pores and completely seals the surface. Finally, apply "Carbon Glide" friction reducer for metal to further reduce friction - and get back the hours of your life you used to spend waxing, with a slick surface that installs quickly and doesn't melt.

Make protecting your tools easier with the Carbon Coating Quick Kit: all the solutions and applicators you need - including our revolutionary new Coating Applicator Block system - in one convenient package. Welcome to the future of nanoprotection!

Additional Questions?

Check the Frequently Asked Questions page, and if you don't see your question there, contact us by calling 844-432-2266 or emailing cs@carbonmethod.com.

Carbon Coating Quick Kit For 1-2 Tools

  • 0.5 fl oz "Carbon Coat" graphene protection for metal
  • 2.0 fl oz "Carbon Cleanse" decontaminator for carbon coating application
  • 6.0 fl oz "Carbon Glide" friction reducer for metal
  • 1 Carbon Method Coating Applicator Block
  • 1 Capture Dowel
  • 10 Carbon Method Coating Cloths
  • 4 Carbon Coating microfiber buffing towels
  • 4 pairs of gloves
  • Instruction booklet

Carbon Coating Quick Kit For 2+ Tools

  • 1.0 fl oz "Carbon Coat" graphene protection for metal
  • 2.0 fl oz "Carbon Cleanse" decontaminator for carbon coating application
  • 6.0 fl oz "Carbon Glide" friction reducer for metal
  • 1 Carbon Method Coating Applicator Block
  • 1 Capture Dowel
  • 10 Carbon Method Coating Cloths
  • 4 Carbon Coating microfiber buffing towels
  • 4 pairs of gloves
  • Instruction booklet

Carbon Coating Quick Kit, Whole Shop

  • 2.0 fl oz "Carbon Coat" graphene protection for metal
  • 6.0 fl oz "Carbon Cleanse" decontaminator for carbon coating application
  • 6.0 fl oz "Carbon Glide" friction reducer for metal
  • 1 Carbon Method Coating Applicator Block
  • 1 Capture Dowel
  • 20 Carbon Method Coating Cloths
  • 8 Carbon Coating microfiber buffing towels
  • 8 pairs of gloves
  • Instruction booklet

Preparation for Carbon Coat is now easier than ever.

Simplify your Carbon Coat installation with Abrasive Pads and Reconditioning Oil from Carbon Method.

 

Our extra-thick 6" x 9" Abrasive Pads flex to work into pitted rust spots, and are faster and cleaner than sandpaper or steel wool. Abrasives are infused throughout the pad for long life, and they're designed to resist loading

 

Our Reconditioning Oil is the ideal solution for bringing your cast iron tool surfaces back to life. It lubricates and removes surface rust, staining, and pitted oxidation in cast iron surfaces, and is our recommended and ideal process to prep your tools for Carbon Coating.

86 Reviews

  • 5
    Works as advertised

    Published by Keith Reed on 11th Sep 2023

    This is a great product, I was absolutely amazed at how smooth my table saw top is. MUCH better than any wax I've ever used

  • 5
    Carbon Coating Quick Kit

    Published by Paul Parchment on 22nd Aug 2023

    Carbon Coating product is of a very high quality and the application procedure is simple and well-illustrated in the quick review guidelines. The cleanse and glide products are equally impressive.

  • 4
    carbon coating

    Published by Unknown on 8th Aug 2023

    does a good job but not sue if its worth the money

  • 5
    Outstanding Product

    Published by Pat Cavanaugh on 2nd Aug 2023

    I am amazed @ the results. I waited a full week before using the tools (table saw, Jointer, band saw) after applying. Moving the material across the surface of the tools was like playing air hockey. And there is no evidence of the wood moving across the tools other than some saw dust. Nothing I have previously used compares. Highly recommend.

  • 5
    CarbonMethod

    Published by Mike Embury on 20th Jul 2023

    Good product just dont be in a hurry

  • 5
    Carbon Method review

    Published by Ed Rizzardi on 23rd Jun 2023

    Applied 3 coats as recommended. Took long than I'm used to applying a product called Waxilit. It's been on my jointer for only 2 weeks. So far so good. Fortunately living in Southern California I just don't have a rust problem. Also keep all my machines when not in use covered with HTC machine cover's.

  • 5
    Amazing results

    Published by Cassie on 22nd Jun 2023

    This product is a keeper. Last year, I did the sandflex sanding blocks method. It took forever and the rust came back. This method felt so much more confident. Can't wait until next season to see if it still holds up.

  • 5
    First impressions

    Published by Roger Bayne - Bayne Custom Woodworking on 19th Jun 2023

    Upon first impressions this is a very good product. The application video's and documentation was excellent. While it took longer to apply than expected with waiting 60 minutes between each coat, I believe the time spent was worth while. I have had one day to use the table saw and jointer after application, but so far I like what I see.

  • 5
    Excellent product with live, human support

    Published by Gordon Kushner on 14th Jun 2023

    I was skeptical of the product with the claims of just how good it is. But... after following the directions to the letter, and taking the time to apply in in the manner outlined, it really is a well designed product, that protects for me what is the single most expensive and important machine in my small shop, the table saw. I ordered the pads to prepare the surface and get down to bare metal, they worked very well. Does it take time to apply the product? Yes. Is it worth the time and energy to apply? Definitely. I'm a very small shop that appreciates good tools, Carbon Method is a "good tool". I would highly recommend it.

  • 5
    Carbon method

    Published by Kenneth Demarest on 14th Jun 2023

    It works great. I’m very happy with it.

Related Products