null

Free domestic shipping for all orders over $150!

Carbon Coating Quick Kit

Retail:
Was:
Now: $84.99 - $199.99
(You save )
(86 reviews) Write a Review
Carbon Coating Quick Kit for 1-2 tools

Description

Everything you need to get back hours of your life - and put them into woodworking where you want them! Prevent rust and reduce friction on your cast iron and other metal tools with a graphene coating that fills pores in metal. Add a nanolayer of protection that completely seals the work surface, providing long-lasting protection against water, oil, and chemicals, reducing wear and eliminating rust. Replace traditional waxes and sprays, and minimize maintenance, with Carbon Coat!

This quick kit contains the full Carbon Coating system, along with all the applicators you need to do the job. You'll find our "Carbon Cleanse" decontaminator for carbon coating application, which will allow you to fully clean your piece before Carbon Coating. Then apply "Carbon Coat" graphene protection for metal to seal your tool with a graphene coating that fills pores and completely seals the surface. Finally, apply "Carbon Glide" friction reducer for metal to further reduce friction - and get back the hours of your life you used to spend waxing, with a slick surface that installs quickly and doesn't melt.

Make protecting your tools easier with the Carbon Coating Quick Kit: all the solutions and applicators you need - including our revolutionary new Coating Applicator Block system - in one convenient package. Welcome to the future of nanoprotection!

Additional Questions?

Check the Frequently Asked Questions page, and if you don't see your question there, contact us by calling 844-432-2266 or emailing cs@carbonmethod.com.

Carbon Coating Quick Kit For 1-2 Tools

  • 0.5 fl oz "Carbon Coat" graphene protection for metal
  • 2.0 fl oz "Carbon Cleanse" decontaminator for carbon coating application
  • 6.0 fl oz "Carbon Glide" friction reducer for metal
  • 1 Carbon Method Coating Applicator Block
  • 1 Capture Dowel
  • 10 Carbon Method Coating Cloths
  • 4 Carbon Coating microfiber buffing towels
  • 4 pairs of gloves
  • Instruction booklet

Carbon Coating Quick Kit For 2+ Tools

  • 1.0 fl oz "Carbon Coat" graphene protection for metal
  • 2.0 fl oz "Carbon Cleanse" decontaminator for carbon coating application
  • 6.0 fl oz "Carbon Glide" friction reducer for metal
  • 1 Carbon Method Coating Applicator Block
  • 1 Capture Dowel
  • 10 Carbon Method Coating Cloths
  • 4 Carbon Coating microfiber buffing towels
  • 4 pairs of gloves
  • Instruction booklet

Carbon Coating Quick Kit, Whole Shop

  • 2.0 fl oz "Carbon Coat" graphene protection for metal
  • 6.0 fl oz "Carbon Cleanse" decontaminator for carbon coating application
  • 6.0 fl oz "Carbon Glide" friction reducer for metal
  • 1 Carbon Method Coating Applicator Block
  • 1 Capture Dowel
  • 20 Carbon Method Coating Cloths
  • 8 Carbon Coating microfiber buffing towels
  • 8 pairs of gloves
  • Instruction booklet

Preparation for Carbon Coat is now easier than ever.

Simplify your Carbon Coat installation with Abrasive Pads and Reconditioning Oil from Carbon Method.

 

Our extra-thick 6" x 9" Abrasive Pads flex to work into pitted rust spots, and are faster and cleaner than sandpaper or steel wool. Abrasives are infused throughout the pad for long life, and they're designed to resist loading

 

Our Reconditioning Oil is the ideal solution for bringing your cast iron tool surfaces back to life. It lubricates and removes surface rust, staining, and pitted oxidation in cast iron surfaces, and is our recommended and ideal process to prep your tools for Carbon Coating.

86 Reviews

  • 5
    Carbon Metod

    Published by David Hard on 15th Apr 2024

    Excellent product. I have struggled with keeping my Iron in good shape. I have tried other products but this one tops them all. I applied it to my new Industrial Saw Stop and wow. What a difference. So I just ordered more to put it on My lathe, 20 planer, Jointer, Band saw and router table. Thanks Carbon Method.

  • 5
    Carbon Method

    Published by Robert Jacobs on 31st Mar 2024

    Beautiful results

  • 4
    Carbon Coating Quick Kit

    Published by Allen Ledet on 22nd Mar 2024

    Applied easily, took some time to prep tools. Applied coating to cabinet table saw, 15 inch planer, small table top jointer, bandsaw and oscillating sander. Had enough product for 3 coats on each. Glide coat made surfaces very slick.

  • 5
    Carbon Coating prep and quick kit

    Published by Ted Thompson on 15th Mar 2024

    This product was so awesome!. I live in very humid Texas and am constantly fighting woodworking equipment rust. The process was very clear and I am totally pleased with the results. I don't plan to ever use anything else in my shop and am already telling my fellow woodworkers about the products.

  • 5
    Application was easy, only time will tell…

    Published by Brad on 11th Mar 2024

    Watched the video and read the instructions. Everything went well and I had enough Carbon Coat to put four coats on 3 large cast iron surfaces. Will allow to fully cure before using Carbon Glide. Lots of Carbon Cleanse left for further applications. Surfaces now look as good as new and I’m looking forward to only needing periodic maintenance to keep them looking great. Thanks CM!

  • 5
    Carbon Method

    Published by Bob Barth on 7th Mar 2024

    Excellent product. My table saw looks like new, and the glide brings it to a new level of slickness. I am preparing to use it on my jointer next.

  • 3
    carbon method

    Published by Thomas on 4th Mar 2024

    So far seems to be working but only time will tell. Very frustrated because I was only able to coat my saw 2-1/2 times when it calls for 3 or 4 coats. Win some , lose some.

  • 5
    Quality product

    Published by Jason Jones on 19th Feb 2024

    So far I really like this system for my sawstop. The instructions are very easy and everything is sent in the kit you will need. The table is clean and slick. It feels very protected. I would suggest this product to anyone looking for a good solution to protect their investment.

  • 5
    Great product.

    Published by Robert Dickey on 16th Feb 2024

    I would highly recommend this product.

  • 4
    Carbon coating quick kit

    Published by James Curtis on 12th Feb 2024

    Product was well packaged, directions easy to follow. Applied 3-4 coats to my new 8" Jointer, my bandsaw table and my spindle sander. Still have others pending. Based on usage per instructions, the Carbon Cleanse will be the first to run out. The plastic gloves included in the kit are rather fragile and easily damaged. Looking forward to a LONG period between cast iron treatment to prevent rust.

Related Products